Fix GT Wizard creation

* Put configuration in a variable to print it
* Put the quad_name in a variable, not fully used by now.
* Set the target FPGA in the TCL.

tcl/combpm_gtwizard.tcl

 # Create a GTWizard IP for one quad.
+set quad_name "X0Y4"
 set module_name "combpm_gtwizard"
-set quad_name X0Y4
 
-# Create IP
-create_ip -name gtwizard_ultrascale -vendor xilinx.com -library ip -version 1.7 -module_name ${module_name}
-
-# Configure the IP
-set_property -dict [list \
-    CONFIG.CHANNEL_ENABLE {${quad_name}} \
-    CONFIG.TX_MASTER_CHANNEL {${quad_name}} \
-    CONFIG.RX_MASTER_CHANNEL {${quad_name}} \
+set gt_ip_config [ list \
+    CONFIG.CHANNEL_ENABLE $quad_name \
+    CONFIG.TX_MASTER_CHANNEL $quad_name \
+    CONFIG.RX_MASTER_CHANNEL $quad_name \
     CONFIG.TX_LINE_RATE {2.125} \
     CONFIG.TX_PLL_TYPE {QPLL1} \
     CONFIG.TX_REFCLK_FREQUENCY {156.2500001} \
@@ -42,8 +38,8 @@ set_property -dict [list \
     CONFIG.RX_CC_K_0_1 {false} \
     CONFIG.RX_CC_PERIODICITY {100} \
     CONFIG.ENABLE_OPTIONAL_PORTS {rxcdrlock_out} \
-    CONFIG.RX_REFCLK_SOURCE {${quad_name} clk1} \
-    CONFIG.TX_REFCLK_SOURCE {${quad_name} clk1} \
+    CONFIG.RX_REFCLK_SOURCE "$quad_name clk1" \
+    CONFIG.TX_REFCLK_SOURCE "$quad_name clk1" \
     CONFIG.LOCATE_TX_USER_CLOCKING {CORE} \
     CONFIG.LOCATE_RX_USER_CLOCKING {CORE} \
     CONFIG.LOCATE_COMMON {EXAMPLE_DESIGN} \
@@ -54,7 +50,15 @@ set_property -dict [list \
     CONFIG.FREERUN_FREQUENCY {100} \
     CONFIG.SECONDARY_QPLL_ENABLE {true} \
     CONFIG.SECONDARY_QPLL_REFCLK_FREQUENCY {156.25} \
-    ] [get_ips ${module_name}]
+    ]
+
+puts $gt_ip_config
+
+# Create IP
+create_ip -name gtwizard_ultrascale -vendor xilinx.com -library ip -version 1.7 -module_name ${module_name}
+
+# Configure the IP
+set_property -dict $gt_ip_config [get_ips ${module_name}]
 
 # If using 2 ports
 # CONFIG.CHANNEL_ENABLE {${quad_name} X0Y5}

tcl/main.tcl

@@ -27,6 +27,11 @@ proc doOnCreate {} {
   variable Vhdl
   addSources Vhdl
 
+  # TODO sould probably get that part number from the project configuration
+  set fpga_part "xczu11eg-ffvc1760-2L-e"
+  set_property part ${fpga_part} [current_project]
+  set_property target_language VHDL [current_project]
+
   # Create GT wizard IP
   source ../tcl/combpm_gtwizard.tcl
 }