Change serial line rate

After check, the line rate is exactly 2.125 Gbps (20*106.25MHz)

tcl/generate_gtwizard.tcl

@@ -8,20 +8,20 @@ set_property -dict [list \
     CONFIG.CHANNEL_ENABLE {X0Y4} \
     CONFIG.TX_MASTER_CHANNEL {X0Y4} \
     CONFIG.RX_MASTER_CHANNEL {X0Y4} \
-    CONFIG.TX_LINE_RATE {2.12} \
+    CONFIG.TX_LINE_RATE {2.125} \
     CONFIG.TX_PLL_TYPE {QPLL1} \
     CONFIG.TX_REFCLK_FREQUENCY {156.2500001} \
     CONFIG.TX_DATA_ENCODING {8B10B} \
     CONFIG.TX_USER_DATA_WIDTH {16} \
     CONFIG.TX_INT_DATA_WIDTH {20} \
-    CONFIG.TX_QPLL_FRACN_NUMERATOR {4563402} \
-    CONFIG.RX_LINE_RATE {2.12} \
+    CONFIG.TX_QPLL_FRACN_NUMERATOR {6710886} \
+    CONFIG.RX_LINE_RATE {2.125} \
     CONFIG.RX_PLL_TYPE {QPLL1} \
     CONFIG.RX_REFCLK_FREQUENCY {156.2500001} \
     CONFIG.RX_DATA_DECODING {8B10B} \
     CONFIG.RX_USER_DATA_WIDTH {16} \
     CONFIG.RX_INT_DATA_WIDTH {20} \
-    CONFIG.RX_QPLL_FRACN_NUMERATOR {4563402} \
+    CONFIG.RX_QPLL_FRACN_NUMERATOR {6710886} \
     CONFIG.RX_JTOL_FC {1.2717457} \
     CONFIG.RX_OUTCLK_SOURCE {RXOUTCLKPMA} \
     CONFIG.RX_COMMA_M_VAL {1010000011} \
@@ -48,7 +48,7 @@ set_property -dict [list \
     CONFIG.LOCATE_RESET_CONTROLLER {CORE} \
     CONFIG.LOCATE_USER_DATA_WIDTH_SIZING {CORE} \
     CONFIG.TXPROGDIV_FREQ_SOURCE {QPLL1} \
-    CONFIG.TXPROGDIV_FREQ_VAL {106} \
+    CONFIG.TXPROGDIV_FREQ_VAL {106.25} \
     CONFIG.FREERUN_FREQUENCY {100} \
     CONFIG.SECONDARY_QPLL_ENABLE {true} \
     CONFIG.SECONDARY_QPLL_REFCLK_FREQUENCY {156.25} \